West Systems 655 G-Flex Epoxy Adhesive Syringe - 25ml

The West System G/flex 655 is toughened epoxy that makes permanent, waterproof, structural bonds. It absorbs the stresses of expansion, contraction, shock, and vibration.

G/flex adheres tenaciously to HDPE, LDPE, ABS, PVC, Polycarbonate and Hypalon plastics. It also bonds metal, glass, masonry, fiberglass, wood.

The syringe contains 12.5ml of resin and 12.5ml of hardener, perfect for small repair jobs.

• Great on plastics including HDPE, LDPE, ABS, PVC, Polycarbonate and Hypalon
• Easy to use syringe to dispense small quantities of epoxy
• Viscosity similar to a gel tooth paste— won’t run or sag

Key Features

• Toughened, resilient, two-part pre-thickened epoxy
• Gives strong bond of many different materials
• Solution for wet and difficult-to bond-woods such as oak and teak
• Bonds metals, glass, plastics, masonry and fibreglass
• Structural bonding absorbs stress, expansion, contraction, shock and vibration
• Can cure underwater
• Easy to use, 1:1 mix ratio provides 45 minute pot life
• Long open time of 75 mins at room temperature
• Initial cure 3-4 hours, workable cure 7-10 hours

Description

G/Flex epoxy 655 is a toughened, resilient, two-part pre-thickened epoxy designed especially for strong waterproof bonding of many different materials. It is the solution for wet and difficult-to-bond woods such as oak and teak, metals, glass, plastics, masonry and fibreglass. It can be used for structural bonding as G/Flex can absorb the stresses of expansion, contraction, shock and vibration. Easy to use it will even cure underwater! 1:1 mix ratio provides 45 minute pot life and long open time of 75 mins at room temperature. Initial cure 3-4 hours, workable cure 7-10 hours. Supplied as kit with 125ml resin, 125ml hardener, 2 mixing sticks, 4 cleaning pads, gloves, 10 mixing palettes and instructions.